exalogic备份exabr怎么用

这篇文章主要介绍exalogic备份exabr怎么用，文中介绍的非常详细，具有一定的参考价值，感兴趣的小伙伴们一定要看完！[root@el02node01 bin]# ./exabr hExaBR 1.2.6 (b12259)Usage: exabr [options]General options: –version Display the exabr version –help Display this usage help and exitTargets: Targets can be specified by listing the comma-separated IPs or hostnames or by using one of the predefined targets: all-ib (all Infiniband switches), all-mgmt (all management (Cisco) switches), all-cn (all compute nodes and their ILOMs), all-cn-iloms (all compute nodes ILOMS), all-sn (all storage nodes and their ILOMs), all-sn-iloms (all storage ILOMs), all-hw (all the hardware components), control-stack, user-vm (zfs snapshot) or all-itemized-vms (all user-vservers listed in the configuration file)Common options: –repository, -r path to the backup repository (any path, usually a mount to a NFS share) (EXABR_REPO environment variable can be also used instead)Commands:init – initialize the exabr configuration file. Uses ECU data or the configuration of the given compute-node to obtain hostnames of different rack components exabr -r init init-ssh, remove-ssh – establish or remove SSH public key authentication exabr -r init-ssh exabr -r remove-ssh backup – back up the target to the backup repository exabr -r backup [–noprompt] exabr -r backup [–noprompt] [–exclude-paths ,..] [–include-paths ,..] exabr -r backup [–noprompt] [–exclude-paths ,..] [–include-paths ,..] Options: –noprompt, -n never prompts for password, and skips the target instead if public key authentication has not been established (via init-ssh command) –exclude-paths comma-separated list of directories or files that should not be included in the backup –include-paths comma-separated exclusive list of directories and/or files to be backed up –timeout timeout value in seconds to wait for the backup to complete. Default is 2700 seconds.restore – restore the target from the backup repository exabr -r restore [-b ] exabr -r restore [-b ] [–exclude-paths ,..] [–include-paths ,..] exabr -r restore [-b ] [–exclude-paths ,..] [–include-paths ,..] exabr -r restore user-vm [-b ] –vm exabr -r restore control-stack [-b

Options:

–backup, -b the name of the specific backup to be restored. If option is not given, the latest backup is used.

the backup name is shown in brackets by ‘list’ command.

–exclude-paths comma-separated list of directories or files that should not be restored from the backup

–include-paths comma-separated exclusive list of directories and/or files to be restored

–vm name or uuid of the vm to restore from the named zfs snapshot. Restores entire disk image

–timeout timeout value in seconds to wait for the restore to complete. Default is 2700 seconds.

stop, start – stops or starts control stack VMs

exabr -r stop control-stack

exabr -r start control-stack

list – list the content of the backup repository

exabr -r list [–verbose]

Options:

–verbose, -v display more details

ib-register – when the hardware component has been replaced and has a new Infiniband identity, register it with the Infiniband fabric

exabr -r ib-register [–dry-run]

Options:

–dry-run display the commands that would be run without performing them.

configure – configure and/or check the ECU networking settings for a re-imaged compute node

exabr -r configure

control-unregister – unregister a compute-node from OVMM and from EMOC even if it is not reachable, or missing

exabr -r control-unregister

control-register – register a live compute-node with OVMM and with EMOC

exabr -r control-register

ERROR: Invalid arguments. Two arguments expected:

以上为命令的帮助．

1.首先进行初始化

./exabr init 10.135.1623.200

2.对配置文件进行编辑

编辑/exalogic-lcdata/backups/exabr.config文件

3.对ib结点进行备份

[root@el02node01 bin]# ./exabr backup all-ib

ExaBR 1.2.6 (b12259)

Logging to file /root/exabr.log

————————

Using backup repository: /exalogic-lcdata/backups

Using configuration file: /exalogic-lcdata/backups/exabr.config

—————————————————

Targets: 3 total

Infiniband Gateway switch: el02gateway01.xx.cn, el02gateway02.xx.cn

Infiniband Spine switch: 10.135.173.239

—————————————————

—————————————————

(1 out of 3)

—————————————————

el02gateway01.fawcar.com.cn authentication successful

Backing up Infiniband Gateway switch el02gateway01.xx.com.cn

Destination directory: /exalogic-lcdata/backups/ib_gw_switches/el02gateway01.xx.com.cn/201812060805

—————————————————

Fetching firmware version

Backing up switch configuration

Backing up partitions

Generating md5 checksum

MD5 checksums created

OK: Infiniband Gateway switch el02免费主机域名gateway01.xx.com.cn backup successful (took: 7 seconds)

—————————————————

—————————————————

(2 out of 3)

—————————————————

el02gateway02.fawcar.com.cn authentication successful

Backing up Infiniband Gateway switch el02gateway02.xx.com.cn

Destination directory: /exalogic-lcdata/backups/ib_gw_switches/el02gateway02.fawcarxx.com.cn/201812060805

—————————————————

Fetching firmware version

Backing up switch configuration

Backing up partitions

Generating md5 checksum

MD5 checksums created

OK: Infiniband Gateway switch el02gateway02.xx.com.cn backup successful (took: 9 seconds)

—————————————————

—————————————————

(3 out of 3)

—————————————————

10.135.173.239 authentication successful

Backing up Infiniband Spine switch 10.135.173.239

Destination directory: /exalogic-lcdata/backups/ib_spine_switches/10.135.173.239/201812060805

—————————————————

Fetching firmware version

Backing up switch configuration

Backing up partitions

Generating md5 checksum

MD5 checksums created

OK: Infiniband Spine switch 10.135.173.239 backup successful (took: 4 seconds)

—————————————————

——————- SUMMARY ———————–

OK: 3 out of 3 finished successfully

—————————————————

4.对计算结点进行备份

[root@el02node01 bin]# ./exabr backup all-cn

略

5.对存储结点进行备份

[root@el02node01 bin]# ./exabr backup all-sn

6.对思科交换机备份

[root@el02node01 bin]# ./exabr backup all-mgmt

7.备份硬件信息

[root@el02node01 bin]# ./exabr backup all-hw

以上是“exalogic备份exabr怎么用”这篇文章的所有内容，感谢各位的阅读！希望分享的内容对大家有帮助，更多相关知识，欢迎关注云技术行业资讯频道！

Options: –backup, -b the name of the specific backup to be restored. If option is not given, the latest backup is used. the backup name is shown in brackets by ‘list’ command. –exclude-paths comma-separated list of directories or files that should not be restored from the backup –include-paths comma-separated exclusive list of directories and/or files to be restored –vm name or uuid of the vm to restore from the named zfs snapshot. Restores entire disk image –timeout timeout value in seconds to wait for the restore to complete. Default is 2700 seconds.stop, start – stops or starts control stack VMs exabr -r stop control-stack exabr -r start control-stacklist – list the content of the backup repository exabr -r list [–verbose] Options: –verbose, -v display more detailsib-register – when the hardware component has been replaced and has a new Infiniband identity, register it with the Infiniband fabric exabr -r ib-register [–dry-run] Options: –dry-run display the commands that would be run without performing them.configure – configure and/or check the ECU networking settings for a re-imaged compute node exabr -r configure control-unregister – unregister a compute-node from OVMM and from EMOC even if it is not reachable, or missing exabr -r control-unregister control-register – register a live compute-node with OVMM and with EMOC exabr -r control-register ERROR: Invalid arguments. Two arguments expected: 以上为命令的帮助．1.首先进行初始化
./exabr init 10.135.1623.200
2.对配置文件进行编辑
编辑/exalogic-lcdata/backups/exabr.config文件3.对ib结点进行备份[root@el02node01 bin]# ./exabr backup all-ibExaBR 1.2.6 (b12259)Logging to file /root/exabr.log————————Using backup repository: /exalogic-lcdata/backupsUsing configuration file: /exalogic-lcdata/backups/exabr.config—————————————————Targets: 3 totalInfiniband Gateway switch: el02gateway01.xx.cn, el02gateway02.xx.cnInfiniband Spine switch: 10.135.173.免费主机域名239——————————————————————————————————(1 out of 3)—————————————————el02gateway01.fawcar.com.cn authentication successfulBacking up Infiniband Gateway switch el02gateway01.xx.com.cnDestination directory: /exalogic-lcdata/backups/ib_gw_switches/el02gateway01.xx.com.cn/201812060805—————————————————Fetching firmware versionBacking up switch configurationBacking up partitionsGenerating md5 checksumMD5 checksums createdOK: Infiniband Gateway switch el02gateway01.xx.com.cn backup successful (took: 7 seconds)——————————————————————————————————(2 out of 3)—————————————————el02gateway02.fawcar.com.cn authentication successfulBacking up Infiniband Gateway switch el02gateway02.xx.com.cnDestination directory: /exalogic-lcdata/backups/ib_gw_switches/el02gateway02.fawcarxx.com.cn/201812060805—————————————————Fetching firmware versionBacking up switch configurationBacking up partitionsGenerating md5 checksumMD5 checksums createdOK: Infiniband Gateway switch el02gateway02.xx.com.cn backup successful (took: 9 seconds)——————————————————————————————————(3 out of 3)—————————————————10.135.173.239 authentication successfulBacking up Infiniband Spine switch 10.135.173.239Destination directory: /exalogic-lcdata/backups/ib_spine_switches/10.135.173.239/201812060805—————————————————Fetching firmware versionBacking up switch configurationBacking up partitionsGenerating md5 checksumMD5 checksums createdOK: Infiniband Spine switch 10.135.173.239 backup successful (took: 4 seconds)———————————————————————- SUMMARY ———————–OK: 3 out of 3 finished successfully—————————————————4.对计算结点进行备份[root@el02node01 bin]# ./exabr backup all-cn略5.对存储结点进行备份[root@el02node01 bin]# ./exabr backup all-sn6.对思科交换机备份[root@el02node01 bin]# ./exabr backup all-mgmt7.备份硬件信息[root@el02node01 bin]# ./exabr backup all-hw以上是“exalogic备份exabr怎么用”这篇文章的所有内容，感谢各位的阅读！希望分享的内容对大家有帮助，更多相关知识，欢迎关注云技术行业资讯频道！

相关推荐: 数据库中如何解决enq: US – contention问题

小编给大家分享一下数据库中如何解决enq: US – contention问题，相信大部分人都还不怎么了解，因此分享这篇文章给大家参考一下，希望大家阅读完这篇文章后大有收获，下面让我们一起去了解一下吧！ enq: US 免费主机域名- contention问题…